[Utdfan]

HI there,

The UD7 rev2.0 is a different board with a different bios. You cant use the UD7 rev 1.0 dsdt. Im looking out for a UD7 Rev2.0 dsdt myslef.

[vjkevlar]

Ok thanks for the info.

Well I did happen to get Ethernet working now and im updated to 10.6.4.

No sound and then Im going to test my video card and do some benchmarking.

My video card is a BFG285 OCX

[johnboy25]

Originally Posted by vjkevlar

Ok thanks for the info.

Well I did happen to get Ethernet working now and im updated to 10.6.4.

No sound and then Im going to test my video card and do some benchmarking.

My video card is a BFG285 OCX

Can you let me know if you get your sound working? I had sound working in 10.6.4 until the most recent apple update (I believe for safari and quicktime). Since then, no luck with current files (tried replacing the AppleHDA, and the LegacyHDA in /Extra). If I find a solution, I'll post it here too. Thanks!

John Bailey
GA-EX58A-UD7 bios F4
Intel Corei7 2.8ghz no OC
EVGA GTX285
6GB RAM
OS 10.6.4
Using all files supplied here with exception of updated sleepenabler for 10.6.4, and now experimental AppleHDA.kext file.

[afd_sg]

Hi

There is a great similarity between the EX58A DSDT files as the main differences in the MBs are the bells and whisles/PCIe config.

The attached is the dsdt.aml for a GA-EX58A-UD3R Rev 2 plus an amended LegacyHDA for S/L/E and Legacy889HDA.kext for E/E.

Processor is i7 930.

Good luck

[peon]

I have a question regarding kext files. Can I put all the kexts that my system needs on the USB stick or do some have to be installed on the actual OS X harddrive? I would really prefer to have everything on the chameleon USB and keep the 10.6 installation untouched by hackintosh files.

Like the ATI files for my 4890 graphics card for example, can these be loaded from the USB stick as well?

[Sobo]

I confirm that the LAN in the GA-X58A-UD7 Version 2.0 does not work!
Perhaps it would be better to specify in the compatible hardware list ...